Install of mp4v2 failed: "Error: Status 1 encountered during processing"

[jens.is.located@…]

Hi,

mp4v2 installation failed with the following error message. See log file content below!

 >  sudo port install mp4v2
--->  Computing dependencies for mp4v2
--->  Building mp4v2
Error: Target org.macports.build returned: shell command failed (see log for details)
Log for mp4v2 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/main.log
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>

version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main help2man 1.40.4_1 exists in the ports tree
:debug:main help2man 1.40.4_1 +universal is the latest installed
:debug:main help2man 1.40.4_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! help2man 1.40.4_1 >= help2man 1.40.4_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5.12 5.12.3_2 exists in the ports tree
:debug:main perl5.12 5.12.3_2  is the latest installed
:debug:main perl5.12 5.12.3_2 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! perl5.12 5.12.3_2 >= perl5.12 5.12.3_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main gdbm 1.9.1_0 exists in the ports tree
:debug:main gdbm 1.9.1_0 +universal is the latest installed
:debug:main gdbm 1.9.1_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! gdbm 1.9.1_0 >= gdbm 1.9.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main p5.12-locale-gettext 1.50.0_6 exists in the ports tree
:debug:main p5.12-locale-gettext 1.50.0_6 +universal is the latest installed
:debug:main p5.12-locale-gettext 1.50.0_6 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
:debug:main Re-registering default for livecheck.version
:debug:main Re-registering default for configure.universal_args
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! p5.12-locale-gettext 1.50.0_6 >= p5.12-locale-gettext 1.50.0_6
:debug:main epoch: in tree: 0 installed: 0
:debug:main gettext 0.18.1.1_2 exists in the ports tree
:debug:main gettext 0.18.1.1_2 +universal is the latest installed
:debug:main gettext 0.18.1.1_2 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.14_0 exists in the ports tree
:debug:main libiconv 1.14_0 +universal is the latest installed
:debug:main libiconv 1.14_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.9_1 exists in the ports tree
:debug:main ncurses 5.9_1 +universal is the latest installed
:debug:main ncurses 5.9_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main expat 2.0.1_1 exists in the ports tree
:debug:main expat 2.0.1_1 +universal is the latest installed
:debug:main expat 2.0.1_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
:msg:main --->  Computing dependencies for mp4v2:info:main .:debug:main Searching for dependency: help2man
:debug:main Found Dependency: receipt exists for help2man
:msg:main 
:debug:main Executing org.macports.main (mp4v2)
:debug:main Skipping completed org.macports.archivefetch (mp4v2)
:debug:main Skipping completed org.macports.fetch (mp4v2)
:debug:main Skipping completed org.macports.checksum (mp4v2)
:debug:main Skipping completed org.macports.extract (mp4v2)
:debug:main Skipping completed org.macports.patch (mp4v2)
:debug:main Skipping completed org.macports.configure (mp4v2)
:debug:build build phase started at Fri Oct 21 20:49:00 CEST 2011
:notice:build --->  Building mp4v2
:debug:build Executing org.macports.build (mp4v2)
:debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/mp4v2-1.9.1" && /usr/bin/make -j2 -w all'
:debug:build Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/mp4v2-1.9.1" && /usr/bin/make -j2 -w all 
:info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/mp4v2-1.9.1'
:info:build /bin/sh ./libtool --tag=CXX --mode=compile /Developer/usr/bin/clang++ -DHAVE_CONFIG_H   -I./include -I./include -I. -I. -I/opt/local/include -Wall -Wformat -O2 -arch x86_64 -fvisibility=hidden -c -o src/bmff/typebmff.lo src/bmff/typebmff.cpp
:info:build /bin/sh ./libtool --tag=CXX --mode=compile /Developer/usr/bin/clang++ -DHAVE_CONFIG_H   -I./include -I./include -I. -I. -I/opt/local/include -Wall -Wformat -O2 -arch x86_64 -fvisibility=hidden -c -o src/itmf/type.lo src/itmf/type.cpp
:info:build  /Developer/usr/bin/clang++ -DHAVE_CONFIG_H -I./include -I./include -I. -I. -I/opt/local/include -Wall -Wformat -O2 -arch x86_64 -fvisibility=hidden -c src/itmf/type.cpp  -fno-common -DPIC -o src/itmf/.libs/type.o
:info:build  /Developer/usr/bin/clang++ -DHAVE_CONFIG_H -I./include -I./include -I. -I. -I/opt/local/include -Wall -Wformat -O2 -arch x86_64 -fvisibility=hidden -c src/bmff/typebmff.cpp  -fno-common -DPIC -o src/bmff/.libs/typebmff.o
:info:build src/itmf/type.cpp:39:43: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::BasicType, 255>'
:info:build const EnumBasicType::Entry EnumBasicType::data[] = {
:info:build                            ~~~~~~~~~~~~~~~^
:info:build src/itmf/type.cpp:67:43: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::GenreType, 0>'
:info:build const EnumGenreType::Entry EnumGenreType::data[] = {
:info:build                            ~~~~~~~~~~~~~~~^
:info:build src/itmf/type.cpp:203:41: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::StikType, 255>'
:info:build const EnumStikType::Entry EnumStikType::data[] = {
:info:build                           ~~~~~~~~~~~~~~^
:info:build src/itmf/type.cpp:219:47: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::AccountType, 255>'
:info:build const EnumAccountType::Entry EnumAccountType::data[] = {
:info:build                              ~~~~~~~~~~~~~~~~~^
:info:build src/itmf/type.cpp:229:47: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::CountryCode, 0>'
:info:build const EnumCountryCode::Entry EnumCountryCode::data[] = {
:info:build                              ~~~~~~~~~~~~~~~~~^
:info:build src/bmff/typebmff.cpp:38:49: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::bmff::LanguageCode, 0>'
:info:build const EnumLanguageCode::Entry EnumLanguageCode::data[] = {
:info:build                               ~~~~~~~~~~~~~~~~~~^
:info:build src/itmf/type.cpp:259:51: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::ContentRating, 255>'
:info:build const EnumContentRating::Entry EnumContentRating::data[] = {
:info:build                                ~~~~~~~~~~~~~~~~~~~^
:info:build 1 error generated.
:info:build make: *** [src/bmff/typebmff.lo] Error 1
:info:build make: *** Waiting for unfinished jobs....
:info:build 6 errors generated.
:info:build make: *** [src/itmf/type.lo] Error 1
:info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/mp4v2-1.9.1'
:info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/mp4v2-1.9.1" && /usr/bin/make -j2 -w all " returned error 2
:error:build Target org.macports.build returned: shell command failed (see log for details)
:debug:build Backtrace: shell command failed (see log for details)
    while executing
"command_exec build"
    (procedure "portbuild::build_main" line 8)
    invoked from within
"$procedure $targetname"
:info:build Warning: the following items did not execute (for mp4v2): org.macports.activate org.macports.build org.macports.destroot org.macports.install
:notice:build Log for mp4v2 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/main.log

[jens.is.located@…]

/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/main.log

[ryandesign (Ryan Carsten Schmidt)]

Duplicate of #31547.

[jens.is.located@…]

Yes, that did the trick :)