py27-pyobjc build fails with setuptools 6

[paulvanlorenzo@…]

Installing py27-pyobjc fails via macports in yosemite. py27-pyobjc produced an error:

Error: org.macports.destroot for port py27-pyobjc returned: command execution failed
Please see the log file for port py27-pyobjc for details:
    /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyobjc/py27-pyobjc/main.log
To report a bug, follow the instructions in the guide:
    http://guide.macports.org/#project.tickets
Error: Processing of port py27-pyobjc failed

I attach the log file. I tried 'sudo port clean py27-pyobjc && sudo port selfupdate && sudo port install py27-pyobjc' but doesn't work. System: OS X 10.10 (14A386b) (yosemite beta version 5)

Do you know how can i fix it??

thanks!!!

[ryandesign (Ryan Carsten Schmidt)]

You say you cleaned and tried again, but the log you attached is not from a clean build. Please clean again and try again just once, then attach that main.log. It built fine for me on Yosemite beta.

[paulvanlorenzo@…]

Replying to ryandesign@…:

You say you cleaned and tried again, but the log you attached is not from a clean build. Please clean again and try again just once, then attach that main.log. It built fine for me on Yosemite beta.

Thanks for answering.You're right, the log it's wrong, I've just replaced the good main.log. I'm not sure what is happening. The problem started when I migrate macports as Migration saids.

Thanks for your help

[ryandesign (Ryan Carsten Schmidt)]

Thanks. I tried again on my system and now I see the same error you do. But I was able to successfully install the port on Yosemite beta back on July 25. So something has changed since then.

[mndavidoff (Monte Davidoff)]

I see the same failure when I try to install py27-pyobjc on Mac OS X 10.6 (Snow Leopard). I also get the same failure when trying to install py27-matplotlib. The problem seems to have started after I upgraded to py27-setuptools 6.0.

[mndavidoff (Monte Davidoff)]

Cc Me!

[paulvanlorenzo@…]

Thanks to all for answering. I think is a bug that happens with the update of yosemite beta, I'm not sure how to fix it. md14-macports@…, try 'sudo port clean py27-pyobjc && sudo port selfupdate && sudo port install py27-pyobjc' some people fix this problem doing it and updating command line tools in mavericks, maybe it works also for Snow Leopard

[mndavidoff (Monte Davidoff)]

Replying to paulvanlorenzo@…:

try 'sudo port clean py27-pyobjc && sudo port selfupdate && sudo port install py27-pyobjc'

I tried this to no avail. I previously reported the same failure when trying to install py27-matplotlib. I had not noticed that py27-pyobjc is a dependency of py27-matplotlib, and the py27-matplotlib failure occurred when trying to install py27-pyobjc.

[wicentowski@…]

Cc Me!

[wichert@…]

This is caused by a change in setuptools which changes the return value from a dictionary to a set: ​https://bitbucket.org/pypa/setuptools/diff/setuptools/command/install_lib.py?diff2=c0243cfb55d2&at=default . A workaround is to modify pyobjc-core's setup.py to handle both situations:

    def get_exclusions(self):
        result = install_lib.install_lib.get_exclusions(self)

        def add(result, fn):
            if isinstance(result, dict):
                result[fn] = 1
            else:
                result.add(fn)

        for fn in install_lib.orig.install_lib.get_outputs(self):
            if 'PyObjCTest' in fn:
                add(result, fn)

        for fn in os.listdir('PyObjCTest'):
            add(result, os.path.join('PyObjCTest', fn))
            add(result, os.path.join(self.install_dir, 'PyObjCTest', fn))

        return result

[wichert@…]

There is a relevant upstream ticket for this issue as well: ​https://bitbucket.org/ronaldoussoren/pyobjc/issue/99/install-broken-under-newest-version-of

[wangjicheng11@…]

It works, and also works for py-pyobjc-cocoa! Thank you!

[luszczek (Piotr Luszczek)]

I had the exact same problem with py34-pyobjc and py34-pyobjc-cocoa. My fix was to replace:

result[fn] = 1

with

result.add(fn)

since result is a Python set(), not a dict()

And it works on Yosemite that is being released to the wild today. I'm running Yosemite GM Candidate 3.

[elventear (Pepe Barbe)]

Cc Me!

[3add3287 (3add3287)]

Cc Me!

[tiasus@…]

Cc Me!

[glen@…]

Cc Me!

[allamistakeo19@…]

Cc Me!

[fracai]

The upstream ticket (linked in comment 11) indicates this has been fixed in trunk and the 3.0.x branch.

[kevin.developer11@…]

Cc Me!

[fracai]

Cc Me!

[epaell]

Cc Me!

[lpsinger (Leo Singer)]

Cc Me!

[lpsinger (Leo Singer)]

Has anyone already asked if upstream can do a point release for us?

[lpsinger (Leo Singer)]

Fixed in r127056, but we should leave this ticket open until it is fixed upstream and we can remove the patch.

[lpsinger (Leo Singer)]

See also r127057 for py-pyobjc-cocoa.

[skymoo (Adam Mercer)]

After this change py27--pyobjc is no longer building for me on Mountain Lion, log from a clean build is attached. Problem seems to be that the patch-Modules-2.2.diff patch file no longer applies cleanly. Therefore I imagine the new patch also changes similar areas.

[lpsinger (Leo Singer)]

Yes, I noticed. I'll make a separate version of the patch for 3.0.1. Thanks!

[lpsinger (Leo Singer)]

I ported the patch forward (without understanding what the patch does) in r127072. Let's see if that works. Note that the patch is for a bug that has been reported upstream, <​https://bitbucket.org/ronaldoussoren/pyobjc/issue/100/cannot-find-interface-declaration-for>.

[skymoo (Adam Mercer)]

Cc Me!

[skymoo (Adam Mercer)]

Replying to aronnax@…:

Yes, I noticed. I'll make a separate version of the patch for 3.0.1. Thanks!

That did the trick, thanks.

[petrrr]

Looks like the update to version 3.0.1 broke this port for Python < 2.7:

--->  Building py26-pyobjc
PyObjC: Need at least Python 2.7
Command failed:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyobjc/py26-pyobjc/work/pyobjc-core-3.0.1" && /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6 setup.py --no-user-cfg build 
Exit code: 1
Error: org.macports.build for port py26-pyobjc returned: command execution failed
Warning: targets not executed for py26-pyobjc: org.macports.activate org.macports.build org.macports.destroot org.macports.install
Please see the log file for port py26-pyobjc for details:
    /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyobjc/py26-pyobjc/main.log
To report a bug, follow the instructions in the guide:
    http://guide.macports.org/#project.tickets
Error: Processing of port py26-pyobjc failed

Should we trace this with a separate ticket?

[petrrr]

Cc Me!

[larryv (Lawrence Velázquez)]

See #41145. We should just trash the older subports.

[petrrr]

If I understood things right, the deprecation period for py26 subports and python26 would last until January 2016. Trashing py26-pyobjc implies speeding up this process quite a bit. We would need to deprecate py26-matplotlib first, which is probably the most important dependent of py26-pyobjc. This in turn requires to discontinue all its dependents of py26-matplotlib immediately.

Is this what we want?

[larryv (Lawrence Velázquez)]

Replying to petr@…:

If I understood things right, the deprecation period for py26 subports and python26 would last until January 2016. Trashing py26-pyobjc implies speeding up this process quite a bit.

When I said that the deprecation period for Python 2.6 would last until January 2016, all I meant was that I’d obsolete python26 at that time, so all dependencies on it would necessarily have to be eliminated by then. That doesn’t mean we have to keep Python 2.6 stuff around for another 14 months.

We would need to deprecate py26-matplotlib first, which is probably the most important dependent of py26-pyobjc. This in turn requires to discontinue all its dependents of py26-matplotlib immediately.

Is this what we want?

I don’t use matplotlib or any of its dependents, so I don't know how important it would be to prolong Python 2.6 support. It looks like the alternative would be to keep py25-pyobjc and py26-pyobjc at an old version, which is awkward.

Anyway, there aren’t that many dependents. I count 41 Portfiles that mention “-matplotlib”; I don’t know how many of those actually need the Python 2.5 or 2.6 subports.

[ryandesign (Ryan Carsten Schmidt)]

In 38e4bd219abb2d6a6da2d58ef3ae3cd26867318a/macports-ports (master):

py-pyobjc: Remove unused patchfiles

Closes: #45310