gss @1.0.4: aclocal-1.16: command not found

[ShadSterling (Shad Sterling)]

2018 Intel macbook just upgraded to Sequoia, sudo port migrate largely failed on #70750, after removing /Library/Developer/CommandLineTools/usr/include/c++ to fix that, sudo port restore --last also largely fails due to gss

:info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_security_gss/gss/work/gss-1.0.4'
:info:build CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh '/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_security_gss/gss/work/gss-1.0.4/build-aux/missing' aclocal-1.16 -I m4 -I lib/gl/m4 -I src/gl/m4
:info:build /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_security_gss/gss/work/gss-1.0.4/build-aux/missing: line 81: aclocal-1.16: command not found
:info:build WARNING: 'aclocal-1.16' is missing on your system.
:info:build          You should only need it if you modified 'acinclude.m4' or
:info:build          'configure.ac' or m4 files included by 'configure.ac'.
:info:build          The 'aclocal' program is part of the GNU Automake package:
:info:build          <https://www.gnu.org/software/automake>
:info:build          It also requires GNU Autoconf, GNU m4 and Perl in order to run:
:info:build          <https://www.gnu.org/software/autoconf>
:info:build          <https://www.gnu.org/software/m4/>
:info:build          <https://www.perl.org/>
:info:build make: *** [aclocal.m4] Error 127
:info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_security_gss/gss/work/gss-1.0.4'

Autoconf appears to have installed successfully a few ports before gss

[ShadSterling (Shad Sterling)]

Some other tickets suggest this could be caused by missing dependencies, but all dependencies mentioned are installed

automake, autoconf, m4, perl5, pcre, pcre2, nmap, and cctools

[ryandesign (Ryan Carsten Schmidt)]

In e9cbe148b95b6d79b781a64d816101f1bcdb5410/macports-ports (master):

gss: Autoreconf properly

Closes: #70849

[ryandesign (Ryan Carsten Schmidt)]

Replying to ShadSterling:

Some other tickets suggest this could be caused by missing dependencies, but all dependencies mentioned are installed

I suspect what those other tickets mean is: ports which should have been listed as dependencies but weren't. In this case, I found that gtk-doc needed to be added.

[ShadSterling (Shad Sterling)]

That fix isn't coming through selfupdate yet, but trying to install it following wiki:howto/InstallingOlderPort (with the correction from ​https://superuser.com/questions/598824/previous-version-of-cgal-with-macports-error-unable-to-execute-port-could-no ) it fails with a different error:

:info:build libtool: compile:  /usr/bin/clang -DHAVE_CONFIG_H -I. -I../.. -I/opt/local/include -isysroot/Library/Developer/CommandLineTools/SDKs/MacOSX15.sdk -Wno-cast-qual -Wno-conversion -Wno-float-equal -Wno-sign-compare -Wno-undef -Wno-unused-function -Wno-unused-parameter -Wno-float-conversion -Wimplicit-fallthrough -Wno-pedantic -Wno-sign-conversion -Wno-type-limits -pipe -Os -isysroot/Library/Developer CommandLineTools/SDKs/MacOSX15.sdk -arch x86_64 -MT libgnu_la-open.lo -MD -MP -MF .deps/libgnu_la-open.Tpo -c open.c  -fno-common -DPIC -o .libs/libgnu_la-open.o
:info:build In file included from base64.c:48:
:info:build ./ialloc.h:39:1: error: an attribute list cannot appear here
:info:build    39 | IALLOC_INLINE void * _GL_ATTRIBUTE_COLD
:info:build       | ^~~~~~~~~~~~~
:info:build ./ialloc.h:32:24: note: expanded from macro 'IALLOC_INLINE'
:info:build    32 | # define IALLOC_INLINE _GL_INLINE
:info:build       |                        ^~~~~~~~~~
:info:build ../../config.h:1192:28: note: expanded from macro '_GL_INLINE'
:info:build  1192 | # define _GL_INLINE static _GL_UNUSED
:info:build       |                            ^~~~~~~~~~
:info:build ../../config.h:1006:20: note: expanded from macro '_GL_UNUSED'
:info:build  1006 | #define _GL_UNUSED _GL_ATTRIBUTE_MAYBE_UNUSED
:info:build       |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~
:info:build ../../config.h:1001:37: note: expanded from macro '_GL_ATTRIBUTE_MAYBE_UNUSED'
:info:build  1001 | # define _GL_ATTRIBUTE_MAYBE_UNUSED [[__maybe_unused__]]
:info:build       |                                     ^~~~~~~~~~~~~~~~~~~~
:info:build In file included from base64.c:48:
:info:build ./ialloc.h:46:1: error: an attribute list cannot appear here
:info:build    46 | IALLOC_INLINE
:info:build       | ^~~~~~~~~~~~~
:info:build ./ialloc.h:32:24: note: expanded from macro 'IALLOC_INLINE'
:info:build    32 | # define IALLOC_INLINE _GL_INLINE
:info:build       |                        ^~~~~~~~~~
:info:build ../../config.h:1192:28: note: expanded from macro '_GL_INLINE'
:info:build  1192 | # define _GL_INLINE static _GL_UNUSED
:info:build       |                            ^~~~~~~~~~
:info:build ../../config.h:1006:20: note: expanded from macro '_GL_UNUSED'
:info:build  1006 | #define _GL_UNUSED _GL_ATTRIBUTE_MAYBE_UNUSED
:info:build       |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~
:info:build ../../config.h:1001:37: note: expanded from macro '_GL_ATTRIBUTE_MAYBE_UNUSED'
:info:build  1001 | # define _GL_ATTRIBUTE_MAYBE_UNUSED [[__maybe_unused__]]
:info:build       |                                     ^~~~~~~~~~~~~~~~~~~~

... and more of the same form

Is that because the autoreconf is getting something wrong? If it's unrelated and should get a separate ticket, should that wait for selfupdate to get the autoreconf fix?

[Buadhai]

Still fails for me on an M2 MBA after sequoia migration. Log file attached:

:info:build Exit code: 2
:error:build Failed to build gss: command execution failed
:debug:build Error code: CHILDSTATUS 4319 2
:debug:build Backtrace: command execution failed
:debug:build     while executing
:debug:build "system {*}$notty {*}$callback {*}$nice $fullcmdstring"
:debug:build     invoked from within
:debug:build "command_exec -callback portprogress::target_progress_callback build"
:debug:build     (procedure "portbuild::build_main" line 10)
:debug:build     invoked from within
:debug:build "$procedure $targetname"

[jmroot (Joshua Root)]

That's #70869.

[Buadhai]

Replying to jmroot:

That's #70869.

How did you know that? I'm asking because I want to have a better understanding of how this all works.

Edit: Turns out I knew that all along. I just posted to the wrong ticket. Sorry.