Opened 15 years ago

Closed 15 years ago

#21822 closed defect (fixed)

lzo2 configure fails building universal for ppc/i386/x86_64

Reported by: george@… Owned by: yunzheng.hu@…
Priority: Normal Milestone:
Component: ports Version: 1.8.1
Keywords: Cc: dossy@…, macports@…, ryandesign (Ryan Carsten Schmidt), fracai
Port: lzo2

Description (last modified by jmroot (Joshua Root))

Output:

Computing dependencies for lzo2
Fetching lzo2
Verifying checksum(s) for lzo2
Extracting lzo2
Configuring lzo2
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_archivers_lzo2/work/lzo-2.03" && ./configure --prefix=/opt/local --disable-dependency-tracking --enable-shared --disable-static --disable-asm " returned error 1
Command output: checking for mprotect... yes
checking for munmap... yes
checking for qsort... yes
checking for raise... yes
checking for rmdir... yes
checking for setjmp... yes
checking for signal... yes
checking for snprintf... yes
checking for strcasecmp... yes
checking for strchr... yes
checking for strdup... yes
checking for strerror... yes
checking for strftime... yes
checking for stricmp... no
checking for strncasecmp... yes
checking for strnicmp... no
checking for strrchr... yes
checking for strstr... yes
checking for time... yes
checking for umask... yes
checking for utime... yes
checking for vsnprintf... yes
checking whether your compiler passes the ACC conformance test... FAILED
configure: 
configure: Your compiler failed the ACC conformance test - for details see 
configure: `config.log'. Please check that log file and consider sending
configure: a patch or bug-report to <markus@oberhumer.com>.
configure: Thanks for your support.
configure: 
configure: error: ACC conformance test failed. Stop.
Error: Status 1 encountered during processing.
Executing: /opt/local/bin/port install lzo2 +universal

Attachments (2)

config.log (156.0 KB) - added by george@… 15 years ago.
Portfile-rrdtool.diff (329 bytes) - added by erik.abair@… 15 years ago.
Patch to add the port to the muniversal group so that it runs configure separately for each architecture

Download all attachments as: .zip

Change History (14)

Changed 15 years ago by george@…

Attachment: config.log added

comment:1 Changed 15 years ago by jmroot (Joshua Root)

Description: modified (diff)
Owner: changed from macports-tickets@… to yunzheng.hu@…
Port: lzo2 added

comment:2 Changed 15 years ago by jmroot (Joshua Root)

Summary: lzo2 build errors on 10.6.1 - ACC conformance test failedlzo2 configure fails building universal for ppc/i386/x86_64

You omitted the important detail that you are building universal for ppc/i386/x86_64...

comment:3 Changed 15 years ago by harrisonmetz@…

What is AAC and why doesn't it work for universal binaries?

comment:4 Changed 15 years ago by dossy@…

Confirmed this on MacPorts 1.8.1 on Snow Leopard 10.6.1. Builds just fine without +universal. Fails as bug describes when trying +universal.

comment:5 Changed 15 years ago by dossy@…

Cc: dossy@… added

Cc Me!

comment:6 Changed 15 years ago by macports@…

Cc: macports@… added

Cc Me!

comment:7 Changed 15 years ago by ryandesign (Ryan Carsten Schmidt)

Cc: ryandesign@… added

Cc Me!

Changed 15 years ago by erik.abair@…

Attachment: Portfile-rrdtool.diff added

Patch to add the port to the muniversal group so that it runs configure separately for each architecture

comment:8 Changed 15 years ago by erik.abair@…

I was able to fix this on my machine by adding

PortGroup muniversal 1.0 PortGroup archcheck 1.0

to the Portfile (after the PortSystem 1.0 line). This causes configure to be executed for each architecture; previously the results of the x64 configure were applied to the ACC conformance test, causing it to fail when building for 32-bit architecture (due to sizeof discrepancies).

Patch attached with the caveat that I've only tested this on a single machine and do not know enough about muniversal/archcheck to be sure that it would work for anyone.

comment:9 Changed 15 years ago by ryandesign (Ryan Carsten Schmidt)

You don't need the archcheck portgroup unless you're going to check the architecture of the dependencies using archcheck.files. See whatever port you copied that line from for an example.

comment:10 Changed 15 years ago by fracai

Cc: arno+macports@… added

Cc Me!

comment:11 Changed 15 years ago by nox@…

comment:12 Changed 15 years ago by ryandesign (Ryan Carsten Schmidt)

Resolution: fixed
Status: newclosed
Note: See TracTickets for help on using tickets.