I'm trying to install arm-none-linux-gnueabi-gcc and it fails. I do have makeinfo installed through and it's a warning so I'm not sure if that's a spurious message or not.
[nathan@berlin:~]$ sudo port -d install arm-none-linux-gnueabi-gcc
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/arm-none-linux-gnueabi-gcc
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/arm-none-linux-gnueabi-gcc
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port arm-none-linux-gnueabi-gcc.
DEBUG: Requested variant i386 is not provided by port arm-none-linux-gnueabi-gcc.
DEBUG: Requested variant macosx is not provided by port arm-none-linux-gnueabi-gcc.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/arm-none-linux-gnueabi-runtime
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: arm-none-linux-gnueabi-runtime cs2005q3.2_0 exists in the ports tree
DEBUG: arm-none-linux-gnueabi-runtime cs2005q3.2_0 is the latest installed
DEBUG: arm-none-linux-gnueabi-runtime cs2005q3.2_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/arm-none-linux-gnueabi-runtime
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port arm-none-linux-gnueabi-runtime.
DEBUG: Requested variant i386 is not provided by port arm-none-linux-gnueabi-runtime.
DEBUG: Requested variant macosx is not provided by port arm-none-linux-gnueabi-runtime.
DEBUG: No need to upgrade! arm-none-linux-gnueabi-runtime cs2005q3.2_0 >= arm-none-linux-gnueabi-runtime cs2005q3.2_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.18_0 exists in the ports tree
DEBUG: gettext 0.18_0 is the latest installed
DEBUG: gettext 0.18_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13.1_0 exists in the ports tree
DEBUG: libiconv 1.13.1_0 is the latest installed
DEBUG: libiconv 1.13.1_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0 is the latest installed
DEBUG: gperf 3.0.4_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
DEBUG: ncurses 5.7_0 +darwin_10+universal is active
DEBUG: Merging existing variants darwin_10 universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Executing variant universal provides universal
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
DEBUG: ncursesw 5.7_0 +darwin_10+universal is active
DEBUG: Merging existing variants darwin_10 universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: Executing variant universal provides universal
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0 is the latest installed
DEBUG: expat 2.0.1_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.18_0 >= gettext 0.18_0
---> Computing dependencies for arm-none-linux-gnueabi-gcc
DEBUG: Searching for dependency: arm-none-linux-gnueabi-binutils
DEBUG: Didn't find receipt, going to depspec regex for: arm-none-linux-gnueabi-binutils
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/arm-none-linux-gnueabi-binutils
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/arm-none-linux-gnueabi-binutils
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port arm-none-linux-gnueabi-binutils.
DEBUG: Requested variant i386 is not provided by port arm-none-linux-gnueabi-binutils.
DEBUG: Requested variant macosx is not provided by port arm-none-linux-gnueabi-binutils.
DEBUG: Searching for dependency: arm-none-linux-gnueabi-binutils
DEBUG: Didn't find receipt, going to depspec regex for: arm-none-linux-gnueabi-binutils
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/arm-none-linux-gnueabi-binutils
DEBUG: Searching for dependency: arm-none-linux-gnueabi-binutils
DEBUG: Didn't find receipt, going to depspec regex for: arm-none-linux-gnueabi-binutils
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/arm-none-linux-gnueabi-binutils
DEBUG: Searching for dependency: arm-none-linux-gnueabi-binutils
DEBUG: Didn't find receipt, going to depspec regex for: arm-none-linux-gnueabi-binutils
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/arm-none-linux-gnueabi-binutils
DEBUG: Searching for dependency: arm-none-linux-gnueabi-binutils
DEBUG: Didn't find receipt, going to depspec regex for: arm-none-linux-gnueabi-binutils
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/arm-none-linux-gnueabi-binutils
DEBUG: Searching for dependency: arm-none-linux-gnueabi-runtime
DEBUG: Found Dependency: receipt exists for arm-none-linux-gnueabi-runtime
DEBUG: Searching for dependency: gettext
DEBUG: Found Dependency: receipt exists for gettext
DEBUG: Searching for dependency: gettext
DEBUG: Found Dependency: receipt exists for gettext
DEBUG: Executing org.macports.main (arm-none-linux-gnueabi-binutils)
DEBUG: Skipping completed org.macports.fetch (arm-none-linux-gnueabi-binutils)
DEBUG: Skipping completed org.macports.checksum (arm-none-linux-gnueabi-binutils)
DEBUG: setting option extract.cmd to /usr/bin/bzip2
DEBUG: Skipping completed org.macports.extract (arm-none-linux-gnueabi-binutils)
DEBUG: Skipping completed org.macports.patch (arm-none-linux-gnueabi-binutils)
DEBUG: Skipping completed org.macports.configure (arm-none-linux-gnueabi-binutils)
---> Building arm-none-linux-gnueabi-binutils
DEBUG: Executing org.macports.build (arm-none-linux-gnueabi-binutils)
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/build" && /usr/bin/make -j2 all'
make[1]: Nothing to be done for `all-target'.
make[2]: Nothing to be done for `all'.
make[3]: Nothing to be done for `all'.
Making info in doc
restore=: && backupdir=".am$$" && \
am__cwd=`pwd` && cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc && \
rm -rf $backupdir && mkdir $backupdir && \
for f in /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.info /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.info-[0-9] /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.info-[0-9][0-9] /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.i[0-9] /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.i[0-9][0-9]; do \
if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
done; \
cd "$am__cwd"; \
if /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/missing makeinfo --split-size=5000000 --split-size=5000000 -I /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc \
-o /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.info /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.texinfo; \
then \
rc=0; \
cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc; \
else \
rc=$?; \
cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc && \
$restore $backupdir/* `echo ".//opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.info" | sed 's|[^/]*$||'`; \
fi; \
rm -rf $backupdir; exit $rc
WARNING: `makeinfo' is missing on your system. You should only need it if
you modified a `.texi' or `.texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy `make' (AIX,
DU, IRIX). You might want to install the `Texinfo' package or
the `GNU make' package. Grab either from any GNU archive site.
make[3]: *** [/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.info] Error 1
Making info in po
make[3]: Nothing to be done for `info'.
make[3]: Nothing to be done for `info-am'.
make[2]: *** [info-recursive] Error 1
make[1]: *** [all-bfd] Error 2
make: *** [all] Error 2
Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/build" && /usr/bin/make -j2 all " returned error 2
DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/build" && /usr/bin/make -j2 all " returned error 2
while executing
"command_exec build"
(procedure "portbuild::build_main" line 9)
invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for arm-none-linux-gnueabi-binutils): org.macports.activate org.macports.build org.macports.destroot org.macports.install
Error: The following dependencies failed to build: arm-none-linux-gnueabi-binutils
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
Can't reproduce this.